Generac 0E6154A Standby Lower Transfer Switch Coil for 150A and 200A RTS series transfer switches.
This solenoid coil is normally damaged by conditions that cause low standby generator voltage to burn up the lower transfer coil. Could also be damaged by a bad limit switch. Cause should be investigated before replacement so that new coil is not damaged during transfer.
If the damage is extensive enough, you can order a complete 150/200A contactor assembly here: Generac 0L2911/0D9618 Complete 200A Transfer Contactor Assembly
Was used in all of the 150A & 200A Generac/Honeywell R series switches including:
RTSC200A3, RTSW200A3, RTSX200A3, RTSD200A3, RTSS200A3, RTSJ200A3, RTSY200A3, RTSY150A3, RXSW200A3, RXSW150A3, RTSR200A3, RTSW150A3, RTSG150A3, RTSG200A3, RTSK200A3, RTSK150A3, RTSM150A3, RTSM200A3, RTSQ150A3, RTSQ200A3, RXSK200A3, RTSM200A3, RXSM200A3, and many others!
Generac replacement parts will also usually fit the following Generac branded generators: Honeywell, Guardian, Siemens, Carrier, Watchdog, Centurion, Eaton & Bryant.
If you need Generac generator troubleshooting support, please visit our interactive forum